Step 1. Measure and cut across the width of the 4x4 until you have three pumpkins.
The pumpkins are cut to 11”, 9” and 6”.

Step 2. Using a base coat allows you to play with the final look.

Step 3. Apply the Orange paint to your liking.

Step 4. I used a template and spray paint to create the face. Be sure to tape the template in place.

Step 5. Cut 6 - 8 five inch long pieces of rope. Run hot glue down the length of each piece and build a vine stem as thick as you like. Wear gloves you will get burned otherwise.

Step 6. Locate the center of your pumpkin. Using a spade bit (1 ¼ or 1 ⅛ “) and drill down 2”.

Step 7. Place your vines and use hot glue to hold them in place.